Five plastics at a glance
| Material | Key properties | Typical uses |
|---|---|---|
| PE · Polyethylene | Lightweight insulation, varying stiffness | Wire insulation and cable jackets |
| PVC · Polyvinyl chloride | Rigid or flexible, depending on formulation | Wire coverings, connector bodies, terminal sleeves |
| PC · Polycarbonate | Impact-resistant, available in clear grades | Clear housings and equipment covers |
| ABS | Stiff, impact-resistant and easy to mold | Appliance and electronics casings |
| PET | Suitable for clear bottles and tough films | Beverage bottles, electrical insulation film |
ABS and PET properties and uses
ABS (acrylonitrile butadiene styrene) is used in appliance housings and tool cases that need stiffness and impact resistance. Clear PC grades are an option for covers that allow visual inspection.
PET (polyethylene terephthalate) is a polyester. Bottle grades are used in beverage containers. Electrical-grade PET films insulate parts in motors and other equipment. Check film thickness, service temperature and dielectric strength.
What does PE mean on a wire connector?
PE is the material abbreviation for polyethylene. Suryong’s public specifications list the body of its PE and winged PE wire connectors as “tough thermoplastic.” If your purchase requires polyethylene or a specific resin grade, verify it against the documentation for the exact part number.
Where are PVC bodies and PC housings used?
- APWC PVC wire connector Insert the conductors and twist to secure them. A steel wire spring inside the PVC body grips the conductors.
- Lever connector Type 1 The clear PC housing lets you see the inserted conductors. The lever you operate to secure them is made of POM.
Three checks when choosing a connector
- Conductor type, gauge and count Check the model’s specification table for supported conductor types, such as solid or stranded, and allowable combinations by size.
- Electrical ratings and installation conditions Verify voltage and applicable current and temperature ratings. Check weathering and chemical resistance data where exposure is expected.
- Flame classification and certification scope The APWC specification lists V-0 for the body material. For finished-product certification, verify the scope in the documentation for the exact model.




